Main Menu
Professional Installation
For professional installation of our parts, contact GSY at jc@gunsmithery.us
FFL 5-43-097-07-9E-20430
Shipping Address:
GSY, 2515 S McKinley Ave,
Joplin, MO 64804
CAMMERTM—MORE THAN
JUST A HAMMER
THE ORIGINAL SOFT-RACK, EASY-OPEN HAMMERTM
ALL PRODUCTS ARE IN STOCK!
FULL INVENTORY - NO BACKORDERS REQUIRED
NO FOREIGN SALES.
WE ARE UNABLE TO SHIP ANY OF OUR PRODUCTS OUTSIDE THE UNITED STATES.
**SPECIAL PRICING AVAILABLE TO FFL HOLDERS/STOCKING DEALERS. CALL OR EMAIL FOR DETAILS**
USPS Ground Advantage (8oz. Max) - $9.50.
USPS Priority Mail Small Flat Rate Box - $16.50
You will be contacted if additional funds are needed to cover extra shipping costs.
INDIVIDUAL PARTS
|
|
Blue Cammer Hammer Description: CNC machined from bar stock 4140 and heat treated to RC 50-55 with black heat treat finish. |
|
|
SS Cammer Hammer Description: CNC Machined from bar stock 420 Stainless Steel and heat treated to R50-55. Machined Stainless finish. |
|
|
.404" Sear Description: Sear tip maintains constant distance of .404" from sear pin center. NEUTRAL ENGAGEMENT with hammer hooks throughout sear movement to release. Neither positive/captive (hammer is lifted with sear movement) nor negative/release (hammer lowers with sear movement). CNC'd by Evolution Gun Works for Cammer Technologies. |
|
|
Hard Sear Description: Perfectly mated hard sear CNC machined from American-made tool steel and vacuum heat treated yielding 52-53 on the RC scale for the best possible combination of strength, wear-resistance and durability. EGW has also made minimal geometric improvements to the original sear spec; grinding the hammer contact surface to ensure strength, while avoiding the too-long condition found in many aftermarket sears. |
|
|
Long Ball Head Disconnector Description: Long Ball Head Disconnector machined from 4140 (RC 48-49) by EGW so the top of the disconnector is taller and does not drag on the sear pin. This is important when you are doing trigger work under 2 1/4 lbs since you can feel the slightest drag. The ball head gets rid of the click usually found on 1911 guns caused by the head moving back and forth in the frame hole. EGW also altered the geometry of the disconnector so that it is not tripped when inserting a loaded magazine. |
|
|
Titanium Hammer Strut Description: Titanium hammer strut machined by EGW. Lighter than steel struts to decrease lock time, and a little longer to avoid free play in the hammer when the hammer is down. |
|
|
Titanium Mainspring Cap Description: Titanium Mainspring Housing Cap machined by EGW for Government or Commander Models is 40% lighter than steel to speed up lock time on 1911 competition guns. The short tail keeps the weight minimal. This cap works great with EGW’s titanium hammer strut. |
|
|
Genuine Colt Sear Spring Description: These genuine Colt sear springs are supplied to us by EGW and are the best sear springs they have come across in 25+ years in the 1911 business. The middle and left side prongs are weight-reduced for added responsiveness and hammer follow prevention. The distinctive blue color is typical of Colt’s excellent heat treating capabilities. |
|
|
Wolff 17# Mainspring Description: 17# mainspring from Wolff Gunsprings. |
|
|
Hammer Strut Pin - SS Description: EGW SS Hammer Strut Pin |
|
|
Hammer Strut Pin - Blue Description: EGW Blue Hammer Strut Pin |
IGNITION KITS
|
|
Blue Cammer Hammer/.404 Sear Description: Full kit includes
|
|
|
Blue Cammer Hammer/Hard Sear Description: Full kit includes
|
|
|
SS Cammer Hammer/.404 Sear Description: Full kit includes
|
|
|
SS Cammer Hammer/Hard Sear Description: Full kit includes
|
HAMMER SEAR COMBOS
|
|
Blue Cammer Hammer & .404 Sear Description: Hammer CNC machined from bar stock 4140 Steel and heat treated to R 50-55 with black finish. .404 sear is machined by EGW and tumble finished prior to final primary and secondary mating cuts. |
|
|
Blue Cammer Hammer & Hard Sear Description: Hammer CNC machined from bar stock 4140 Steel and heat treated to R 50-55 with black finish. Sear is machined by EGW and tumble finished prior to final primary and secondary mating cuts. |
|
|
SS Cammer Hammer & .404 Sear Description: Hammer CNC machined from bar stock 420 Stainless Steel and heat treated to R 50-55 with machined stainless finish. .404 sear is machined by EGW and tumble finished prior to final primary and secondary mating cuts. |
|
|
SS Cammer Hammer & Hard Sear Description: Hammer CNC machined from bar stock 420 Stainless Steel and heat treated to R 50-55 with machined stainless finish. Sear is machined by EGW and tumble finished prior to final primary and secondary mating cuts. |
